To many people who made repairs in their apartment, they often faced the problem of aligning a concrete or cement foundation for coating. Often, it is quite problematic to get a perfectly smooth surface. Incorrect floors will help you get rid of this problem and greatly simplify this process. A solution of such a gender spreads very well and almost independently forms an almost perfect surface. Such a surface is quite strong and wear -resistant.
To many people who made repairs in their apartment, they often faced the problem of aligning a concrete or cement foundation for coating. Often, it is quite problematic to get a perfectly smooth surface. Incorrect floors will help you get rid of this problem and greatly simplify this process. A solution of such a gender spreads very well and almost independently forms an almost perfect surface. Such a surface is quite strong and wear -resistant.Burning floors are usually designed to align celebrations from concrete and obtain the base in the construction of various buildings of industrial or residential destiny. Almost all the grounds from cement are often suitable for laying the bulk floor. It should be borne in mind that the surface area should not exceed 15 mPa. Keep in mind that before filling this type of floor, you need to close all the seams of the joints and cracks if there are such. The bases must be cleaned of various oils, dust and glue, t.To. These substances can weaken the strength of adhesion of the base and mixture.
These floors today refer to self -leveling mixtures. Such mixtures usually spread themselves and without outside help. If you have a very large area of the room, then you need to purchase and use a pump or a pumping device. If the mixture is aligned, then you will need to smear it with a spatula.
Usually bulk floors harden and spread very quickly. They are based on cement or resin. Very often manufacturers add various additives that can improve plasticity and fluidity. How your floors will dry, then you should see a durable layer. There should not be cracks on it. The main plus is also that the floors can be operated without flooring.
If you installed a bulk floor, then, despite the fact that operation without flooring is allowed, you can cut the seams. Polymer floors will practically not give you any shrinkage, but still they will come in handy.