Thinking about making smooth and beautiful floors in our room, we begin to choose the material, it can be both laminate, or parquet, linoleum or a massive wood board. From any of these materials you can make a wonderful and reliable floor that will last a long time. But rarely, someone immediately thinks about what basis such a beautiful coating will have, because without a flat flooring, you will not be able to achieve an even coating. And for such a basis it is quite possible to use plywood. She herself can become a good material for the surface of the floor, if it is subsequently opened with varnish.
If you figure out which is better to take a plywood for the draft floor, you need to know that plywood can consist of several layers of glued and compressed wood. And, accordingly, the more layers there are, the more reliable such a coating will be. The best options may be the one if the plywood consists of eleven layers, this will be the most optimal solution. It is better to purchase a plywood with increased moisture resistance, as it is processed with special materials, but if there is an average moisture resistance, then it can be used. They make plywood from various wood, but for such work it is more suitable from birch.
It is also worth paying attention to the plywood variety, of course, it is better to purchase the first or second variety, they have higher quality and they are perfect for the room. The lower varieties will not be suitable for the manufacture of the draft floor, as they will not be strong. Lay plywood, as a rule, you will be on the floor of concrete or wood. If you have such a floor relatively even, then you can immediately lay the plywood on it. If plywood sheets are stacked on concrete, then it is necessary to carefully replace the surface and remove all the garbage. And after that you can start installation.
If you are interested in a handwritten welding device Dytron Polys P-4A 650 W TraceWeld Solo, go to the site . The Polys P-4A 650W Traseweld device belongs to the professional series of Dytron manual welding machines. The Polys P-4A 650W TraceWeld welding machine microprocessor controller provides high accuracy (± 1.5 ° C) of maintaining the given heater temperature.
We recommend reading: