The dismantling of a plastic window may be needed for a variety of reasons. But what would they not, of course, do such work in compliance with a certain technology. Having shown a certain share of accuracy to remove the PVC window and you can independently.
The order of work
1) the first thing to do is to dismantle the windowsill and tide. It will not be difficult to carry out this work. To remove the windowsill, it is necessary to cut a layer of mounting foam and pull it jerk up and on yourself. You need to try not to overdo it and not break the part. The tide is also removed;
2) then start dismantling the wings. In order to remove these elements, they must first be opened and remove decorative pads from the loops. Then you need to put the upper pin with a screwdriver and pull it down. Then it is completely pulled out by the pliers, holding the window with the hand. After that, the sash is lifted up and carefully removed from the lower pin;
The balcony plastic door is also dismantled in approximately the same way. The element is removed from the loops using the same technology;
3) At the third stage, it is necessary to remove the double -glazed window from the dull part of the plastic window KBE. To do this, using a rubber hammer and a chisel, graduates are pulled out. The first to take out vertical. Then — lower and last the upper. The double-glazed window is carefully pulled out and put to the side, putting it somewhere to the wall;
4) then proceed to the dismantling of a window frame. For this, the slopes around the perimeter at first pass by the punch, making the stroke. Then the fasteners are cut, or an anchor is unscrewed, depending on which type of fastening was used when installing. Next, the mounting foam is removed. You can combine its pruning with the trim of the plates by putting a diamond concrete disk on the grinder, or thin cut on metal. All that remains to do now is to get the frame out of the opening. To do this, you need to pull it down and down.
Now you can install a new window, or proceed to repair. As you can see, the dismantling of the PVC window is nothing particularly complicated. You just need to do everything carefully. In particular, it is worth showing caution when dismantling the double -glazed window itself. You should not use a metal hammer when taking out the stalks. Better to take wooden or plastic. In the event that all the details remain intact, the window can be, for example, sell.
Video on the topic: