When operating the machine, damage to the paintwork of its body inevitably occurs. This occurs under the influence of atmospheric precipitation, various chemicals used by road services, temperature differences, hits on the grounds of the road coating from under the wheels of the nearby cars, etc. D.
The resulting small scratches, microcracks and other problem areas formed as a result, cause corrosion of the corps. The plots affected by corrosion at first have a very small size, but gradually grow and often lead to significant destruction. Repair of such damage can be very expensive, so most automakers recommend regular prevention. It consists in polishing the body of your car, which allows you to remove small flaws, cracks, recesses.
If the primer is not damaged, restoration polishing is enough, if traces of corrosion are damaged and noticeable — complete.
The procedure is carried out in two stages: preliminary and final.
At the preliminary stage, a damaged layer of paint coating is cleaned using abrasive pastes. After pre -polishing, the abrasive is thoroughly washed off, and the car is dried. Then the surface is finally rubbed to shine.
This procedure can be carried out manually or using polishing equipment. Or you can contact one of the companies in your city that provide these services. As a rule, these are car wash.
If you decide to perform the procedure yourself using special equipment, then here are some tips for you:
1. Apply a small layer of the abbreziv on the polishing circle, and then clean the lacactive coating layer at 2000 rpm in a minute in a circular motion. This should be done in circular movements. After several passages in one site, proceed to the next. Make sure that after passing the site there are no old scratches left on it.
At the same time, the areas that you pass by the tool should be slightly superimposed on each other. This is a recovery (preliminary) stage.
2. The second stage is protective (final). During it, a special layer of polish is applied to the body surface with a soft circle.
Different types of this coating have different durability — from a month to six months. When buying, pay attention to this.