Building a garage for your own car, it should be remembered that the design should have strength, reliability and finished beautiful appearance. This effect can be achieved by using corrugated sheets for the construction of the garage. The unique characteristics of this building material are suitable for all parameters for garage construction. Cheap and lightweight, with a long service life, easily attached to supports — this is a far from incomplete list of advantages of corrugated board.When choosing a suitable place for a garage in a garden or in a private house, the prospects for the development of the site for long years should be taken into account. You need to know that the size of the standard garage for 2 cars is 8.5 m per 6.5 m. It is best to put a garage from corrugated board close to the wall of the house. Thus, building materials and place on the site are saved. One of the important advantages of building a garage close to the house is the ability to easily bring all communications to the garage without difficulty and additional expenses.
It is important to observe the priority of work with independent construction of a garage from corrugated material.
The main stages of work related to the construction of the garage are located in the following order:
— Initial planning and design of the structure;
— Construction of the foundation;
— Installation of the frame;
— Installation of walls and openings;
— Installation of the roof.
If we consider the construction of the garage alternately for these positions, then independent construction will not seem too unbearable task. The foundation laying can be started by digging into the ground of a regular pipe to a depth of 1.5 — 2 meters. Next, the trench with a pipe around the entire perimeter of the garage is poured with concrete. Further, a frame made of wood or a metal profile is installed on a dried strip foundation.
The sheets of corrugated sheets of corrupted corrugated board are installed on the frame designed to protect the inner room of the garage from rain and wind. Fasteners are carried out using special bolts or screws — screws. The roof on such a garage is also made from corrugated board. The joints of sheets are sealed with special bitumen sealants. You should not forget about the overhang of the roof, which should protrude beyond the edge of at least 40 mm.
After the end of the roofing, the garage should be insulated. The installation of garage gates will require still slight effort. After the construction and leveling of the floor, your favorite car can be rolled into a new garage.