Most people annually arrange a small or great repair in their house, which can start from the installation of windows and end with a replaceable doorway. The change of layout is the main component in giving the premises of individuality and superiority, which cannot be done without a change of boring doors.
The installation of new doorways must be started after deciding on the future type of the entire structure, since this choice will be the main direction in which the search for the desired door will take place.
If the room is not at all large, then it is recommended to install sliding systems, because they will help to visually increase any room, and they will also not interfere with the movement in the apartment, unlike swing doors that are not very convenient to use.
Sliding doors in the apartment are mounted according to the following principle:
1) along the wall;
Does not take much time and does not require special skills.
2) inside the wall;
Involves partial destruction of the wall and the installation of a metal cassette, followed by gypsum plasterboard.
Directors for sliding doors:
A) the upper — the canvas is attached using the upper edge, to the ceiling or wall;
C) the lower ones — a small spray is attached to the floor, which can be drowned on the floor;
C) lateral — not used in urban -type apartments.
Installation of a clinic box:
At this stage, two people are needed. The box is installed in the door compartment and strengthened with wedges with which you can subsequently adjust the location of the box in the doorway.
Installation of a fixed bar:
The canvas is installed in such a way that the canvas fit tightly to the grooves of the upper and lower guide.
If you plan to drown a small lower gap, you need to provide a screed at the very first stage, which will allow you to give the door an elegant and attractive look.
Separation bar:
It is necessary to perform this action with the assistant, since it will be easier for the two of them to install the panel in the upper groove without damage, because the repair of a chopped or scratched and long -term and long process is repaired or a scratched panel.
The last step is the adjustment of the installed design for a more smooth sliding along the panel.
After independent installation of sliding doors, joy will follow, since, following the instructions you can do everything right and in a short time.