Today, more and more often, especially in office premises, installed suspended ceilings Armstrong. The design of this type of ceilings has many advantages and advantages, which include simplicity and ease of installation, a beautiful appearance.
Armstrong ceiling has such basic elements as a supporting, transverse and corner profile, ceiling and suspended slabs. The profiles differ only in color, but the plates differ in indicators as moisture resistance and sound insulation.
Doing the ceiling is best done with a partner. Before starting directly to work, it is necessary to calculate the position of the plates on the surface of the ceiling. After that, it is necessary to clean the surface of the ceiling from dust. Also if there are irregularities on the ceiling, they are recommended to eliminate them. After the ceiling is completely prepared, you can start installing the first profile. Its installation is carried out according to the available sizes that were made using the level. The location of the first profile is carried out near the wall.
Now the angular profile is installed, and when performing its installation, it is necessary taking into account the height of the future ceiling. In order for the profile to be installed as smoothly as possible, it is necessary to use the building level.
After the first two profiles are installed, we proceed to fix the suspensions. This construction element is necessary for fixing the supporting profile. The installation of the supporting profile is performed at a distance of at least 120 cm from one another. After installing all the suspensions on their hooks, the supporting profile is attached. In the event that during the installation process it was not possible to perform their maximum even possible location, this defect can be corrected by using butterflies on the suspensions. If the ceiling dimensions are large than that of the load -bearing profiles, then you will have to stretch the control cord between the corners, with the help of which it will be possible to achieve maximum accuracy, setting the profile. You need to extension of profiles alternately: the first, after the second, third.
You are interested in the design of shop windows? Optimal prices and quality work. We are waiting for you on the site
