The installation of a wooden skirting board usually begins with the measurement of the room and purchase the right amount of material.
Next, the skirting boards are kept in the room where it will be mounted, about a day to adapt it to the internal temperature and the relative humidity of the room. After that, each strip is washed down at an angle of 45, so even when they are justified not in the corners, and on a flat wall this location will be less noticeable.Then the strips of the skirting board are directed to the wall with dowel nails or self -tapping screws, starting work from the inner angle and further along the entire periphery of the room. To give the final result a more well -groomed look, it is necessary to drill in the places of fastening so that the hats of nails or screws do not look.
At the end of the installation and supporting work, you should put the hitch and the joints of the joints with putty on the tree and let it dry completely during the entire time indicated according to the instructions. Then the wooden skirting board needs to be prepared for varnishing or painting, cleaning it of pollution, and then perform paintwork.