There are several options for plastering walls. They differ mainly in quality of the final result. The most preferred option is the plaster of the walls by «lighthouses». At the same time, there is an opportunity to achieve that the walls will be perfectly smooth, and the corners are simply perfect. On this option and dwell.
When placing walls along the “lighthouses”, vertical beacons are applied on the wall with alabaster or using racks. Applying a plumb line or level, ensure that they are bred strictly by level. Between the beacons, the distance should be such that the edges of the rules or graters lie down with both edges on them.
After that, a solution of plaster is applied. At the expense of thoroughly exhibited lighthouses, we achieve the necessary quality of the walls and carefully remove the angles. If the rails were used, they are removed, and their installation site is closed. Alabasteral beacons can not be dismantled.
Before we start putting the walls, it is necessary to let them dry well. Then we apply a soil layer to the plastered walls, we wait for now, it will dry out and proceed to putty.
Since we brought the walls along the beacons, then it is necessary to put the walls under the ruler or, as they say, “under the egg”. After such a putty, when applying the control line, the clearances between the wall and the ruler should not be completely.
As a rule, the ideal state of the wall cannot be achieved by applying one layer of putty. In this case, again — still waiting for the first layer, it will dry out, we apply the second layer. But before applying it, it is necessary to lightly light the wall with fine sandpaper and apply a primer layer on it. Such a large number of layers of primer are determined by the desire to achieve the necessary fortress of the applied putty.
After final putting the wall, the wall again with a small skin, we apply the final layer of primer and the walls are ready for subsequent operations.
You can buy a dining table and chairs for the kitchen and other home furniture on the site: